Mobile DVR

Location : Home > Product > Mobile DVR

SE-MDR300

 

 

 

 

 

 

 

 

 

 

 

Overview:
H.264 video compression format, 1-4 channels video input, 1 channel CVBS output
 Adopt ADI US professional 10bits chip video decoder processor, the image quality of our products boost level by 4 times than that of 8bits under the same stream.
 Each video channel is attached with an independent video decoder to avoid disturbing from each other.
 HD real time recording: 100f/s (PAL); 120f/s (NTSC). Recording resolution: CIF/ 2CIF/ D1 optional
 Maximum support 2CH of D1 + 2CH of CIF real time recording / playback
 Professional car power supply design, support 8V~36V DC wide voltage range input (instantaneous voltage can up to 70V)
 Provide a strong circuit protection .including DC out protection, reverse voltage protection, overload protection, short circuit protection, over temperature protection etc. DC 12V/2A output.
 Unique UPS power-off protection technology ensures the integrality of recording data when accidental power failure occurs, even can normally work for 10sec - 15sec without power supply at the same time.
 Support mobile phone monitoring
 Support various recording modes: auto recording, alarm recording (open/close the door), timed recording manual recording etc.
Support video packing time setting
 G.726 audio compression format
 1CH microphone or linear audio input.  
 Support remote voice surveillance and remote voice talkback function
 4CH alarm input, 2CH alarm output
 Support pre-recording function, 15 seconds pre-recording of alarm, recording time after alarm can be adjusted in between 30 sec ~ 30 min
 Support the setting of remain storage space alarm function, overspeed alarm, acceleration alarm, motion detection alarm
 Communication interface: RS232, RJ45. ODM expansion design
 Support GPS, G-sensor, Gyro-sensor acceleration transducer
 Support 3G wireless transmission functions: WCDMA, CDMA2000, TD-SCDMA, GPRS, EDGE, WiFi wireless transmission (support WiFi automatic download and resume from break point) are optional
 Support 3G remote fuel cut-off and power-off
 The video file format is ASF. The file can be played by general media player VLC or our customized software which support 1 channel or 4 channels synchronous playback
 Data storage: maximum support 2 pcs 64G SD card, Using Japanese origin SD card connector can guarantee the fluency of data reading.
 Data redundancy storage technology
 Quick start-mode: the device will turn to working in 20 sec after power on. Other start- or close- mode including key on/off, timed turn on/off, delayed-off.
 Energy- efficient design, the power consumption is less than 5W with normal operating state
 All electronic components conform to industrial standard through the entire design, including the special connectors dedicated for mobile DVR.
 With anti-vibration, anti-high temperature protection and low temperature pre-heated function, the quality of video files is always guaranteed. Working temperature: -20℃ to +70℃
 Mini and industrial grade design: easy installation and easy sheltering 

Specifications

Item

SE-MDR300

Operating System

Linux (2.6)

Video Compression

H.264 main profile

OSD

Overlays letters and logo… like some date& time

 info and vehicle ID into video streaming.

GUI

Graphical User 

Interface

Setup system parameters through the remote control.

Video and 

Recording

System

Video input

1-4 channels input, 4 CVBS, 1.0Vp-p, 75Ω

Video output

1CH output, CVBS, 1.0Vp-p, 75Ω, single or quad monitor

Preview

Support 1 channel and 4 channels preview. Also can 

preview through PC, with PC Viewer software.

Recording 

Resolution

Support CIFHD1D1 resolution optional, maximum 2CH of D1 & 2CH of CIF.

Video Quality

1-4 levels, 1 is the highest level , 4 is the lowest level.

Recording 

PAL: 100Frame/s , CCIR625 line,50 field

NTSC: 120Frame/s, CCIR525 line,60 field

CIF: 256Kbps ~ 1.5Mbps, 4 quality level support,

HD1: 600Kbps ~ 2.5Mbps, 4 quality level support 

D1:  800Kbps ~ 3Mbps, 4 quality level support

Video stream 

ISO14496-10 standard

Recording 

Mode

Default auto recording after power on, support timed 

recording, alarm  recording

Audio

Audio Input

Mic or line in, up to 2 channels

Audio Output

1 channel output, output voltage: 1V ~2V

Compression

G.726,  5KB/s

Playback 

System 

Video Search

Search video via time, type(normal or alarm), target SD card

Playback

Support 1 to 4 channels playback. 

 

Support forward and backward at the speed of: x 2,x4,x8,x16.

Alarm

Input

Support up to 4 channels alarm input. 

Alarm recording: include the recording within 15 seconds 

ahead of the alarm starting, and the recording after alarm 

dynamically adjusted .. 

Output

2Ch alarm output, level signal. 

Communication 

Port

RS232 for remote control;  RJ45 .

Storage

SD Card

Support 2 SD Cards, 32GB for each. Support SD card 

recycle recording. Automatically switch to the other SD

 Card after the one is full, and the data will be automatically 

overwritten .

Firmware upgrade

Upgrade with SD card

File Format

ASF

File System 

FAT32

Power

Power 

Management

System auto power on/off mode:

1,Vehicle acc on/off---system auto power on after acc on, system power off 

according to the delay time (up to 240min, default 5min) 

after acc off. 2,Preset time---Only according to time preset table.

Power Supply

DC:+8V ~ +36V

Power Output

+12V@1.5A+5V@1.5A

Power-off data 

protection 

All data can be saved and the recording files can 

be closed normally in case of power lost. 

Working 

Environment

Temperature

-20 to +70

Humidity 

20% to 80%

Others

Dimensions

112(W) x36(H) x138(D) mm

Net Weight

360g